Marshall Woburn Speaker – Setup Guide

How to Set Up

1. Unboxing & Power On

• Remove the Marshall Woburn III, power cable, and documentation from the box.
• Place the speaker on a stable, flat surface with at least 10–15 cm of space around it for optimal sound performance.
• Connect the power cable to the speaker and a wall outlet.
• Turn the speaker ON using the power switch on the top control panel.
• The indicator light will turn on, confirming the device is powered.

2. Bluetooth Pairing

• Press the Bluetooth button on the top panel.
• The LED indicator will begin flashing blue, meaning pairing mode is active.
• On your phone, tablet, or computer:
• • Open Bluetooth settings
  • Select “Marshall Woburn III”
• Once connected, the light will remain solid.

✅ The speaker is now ready to use.

3. Using the Speaker

• Control volume, bass, and treble using the physical knobs on top.
• Playback can be controlled directly from your device or via the speaker controls.
• The Woburn III supports:
• • Bluetooth
  • AUX input (3.5 mm)
  • RCA input

⚠️ Do not adjust advanced audio settings or firmware unless instructed.

How to Factory Reset

1. Make sure the speaker is powered on.
2. Press and hold the Bluetooth button and the Volume knob together.
3. Hold for about 5 seconds until the LED turns orange.
4. Release the buttons — the speaker will restart and reset automatically.

✅ The device is now restored to factory settings.

How to Return

1. Remove Personal Data

• Ensure the device is fully factory reset.
• Confirm it no longer appears in your Bluetooth device list.

2. Clean & Repack

• Wipe the speaker gently using a dry, soft cloth.
• Do not use liquids or cleaning chemicals.
• Repack:
• • Speaker
  • Power cable
  • All original packaging materials

Important Notes

• All original packaging and cables must be included.
• Missing accessories or improper reset may result in additional fees.
• Do not attempt repairs or modifications.

Updated on: 30/12/2025