How to Setup

1. Unpacking and Powering On

Remove the Philips Hue Gradient Signe Table Lamp, power adapter, and documentation from the packaging.

Place the lamp on a flat, stable surface with sufficient space around it to allow the light gradients to project properly.

Connect the power adapter to the lamp and plug it into a power outlet.

The lamp will power on automatically and emit a default white light.

2. Initial Configuration (Hue App Setup)

Download the Philips Hue app from the App Store or Google Play Store.

Ensure Bluetooth is enabled on your smartphone or tablet.

Open the Hue app and follow the on-screen instructions to:

• Add a new light via Bluetooth
• Name the lamp and assign it to a room
• Adjust brightness, colors, and light gradients

Optional (Advanced Setup):

• Connect the lamp to a Philips Hue Bridge for full smart features
• Enable voice control via Siri, Google Assistant, or Alexa

Wait until the app confirms that the lamp has been successfully added.

Important Note:

Do not change system ownership, bridge pairing, or account ownership beyond basic app usage.

3. Using the Lamp

Control the lamp using:

• The Philips Hue app (brightness, colors, gradients, scenes)
• Voice commands (if connected to a Hue Bridge and voice assistant)
• Automation and schedules (Bridge required)

The lamp supports 16 million colors, dynamic gradients, and smooth dimming.

Important Note:

If you connect the lamp to your personal Hue account or Hue Bridge, you must remove it before returning the device to avoid additional service charges.

How to Factory Reset

Before returning your rental device, the lamp must be fully reset.

Reset — Using Bluetooth (Without Hue Bridge)

1. Turn the lamp off using the power cable.
2. Turn the lamp on.
3. In the Philips Hue app:

• • Go to Settings → Lights
  • Select the Gradient Signe Lamp
  • Choose Delete / Remove Light

4. Confirm removal.

The lamp will revert to its default state.

Reset — If Connected to a Hue Bridge

1. Open the Philips Hue app.
2. Navigate to Settings → Lights.
3. Select the lamp and choose Delete Light.
4. Confirm removal from the Bridge.

How to Return

1. Remove Personal Data

• Remove the lamp from the Philips Hue app
• Ensure it is no longer linked to any Hue Bridge or account
• Verify the lamp powers on in its default light mode

2. Clean and Repack

Wipe the lamp gently with a soft, dry cloth only.

Do not use liquids, sprays, or cleaning agents.

Repack the lamp, power adapter, and documentation in the original packaging.

Important Notes

• Reset Required: Devices returned while still linked to a Hue account or Bridge may incur a refurbishing or reset fee.
• Complete Packaging: Missing accessories (especially the power adapter) may result in additional charges.
• Report Issues: Any damages, connectivity issues, or defects must be reported immediately. Unauthorized repairs or modifications are not permitted.

Updated on: 08/01/2026