Big whiteboard setup guide

What’s in the box:

• 1× Whiteboard panel
• 2× Vertical metal stands
• 2× Metal feet (base supports)
• 1× Horizontal crossbar
• 4× Caster wheels (optional, if included)

🔧 Step-by-step Instructions

Step 1 – Attach the feet

• Take the two metal feet and connect them to the bottom of each vertical stand using bolts and the included wrench.
• Make sure the wheels (if any) are pointing outward.
• Tighten the bolts securely.

Step 2 – Install the crossbar

• Position the horizontal crossbar between the two vertical stands (around halfway up).
• Use screws or bolts to fix both ends of the crossbar to the stands.
• This will help stabilize the structure.

Step 3 – Mount the whiteboard

• Carefully lift the whiteboard panel and place it between the two vertical stands.
• Align the brackets or hooks on each side with the stands.
• Secure the board using the included fasteners or knobs (usually twist-locks).

Step 4 – Final adjustments

• Ensure all screws and bolts are tight.
• Test the rotation or lock feature if your board has one.
• Double-check wheel locks (if applicable) for safety.

✅ Done!

Your big whiteboard is now assembled and ready for use.

📌 Extra Notes

• Clean the board with a dry eraser before first use.
• Do not use permanent markers on the surface.
• For best results, place on a flat surface.

Updated on: 04/08/2025