> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.monis.rent/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Hue Signe Gradient Lamp setup guide

# How to Setup

### 1. Unpacking and Powering On
Remove the **Philips Hue Gradient Signe Table Lamp**, power adapter, and documentation from the packaging.
Place the lamp on a flat, stable surface with sufficient space around it to allow the light gradients to project properly.
Connect the power adapter to the lamp and plug it into a power outlet.
The lamp will power on automatically and emit a default white light.

### 2. Initial Configuration (Hue App Setup)
Download the **Philips Hue app** from the App Store or Google Play Store.
Ensure Bluetooth is enabled on your smartphone or tablet.

Open the Hue app and follow the on-screen instructions to:
* Add a new light via Bluetooth
* Name the lamp and assign it to a room
* Adjust brightness, colors, and light gradients

Optional (Advanced Setup):
* Connect the lamp to a **Philips Hue Bridge** for full smart features
* Enable voice control via Siri, Google Assistant, or Alexa
Wait until the app confirms that the lamp has been successfully added.

**Important Note:**
Do not change system ownership, bridge pairing, or account ownership beyond basic app usage.

### 3. Using the Lamp
Control the lamp using:
* The Philips Hue app (brightness, colors, gradients, scenes)
* Voice commands (if connected to a Hue Bridge and voice assistant)
* Automation and schedules (Bridge required)
The lamp supports **16 million colors**, dynamic gradients, and smooth dimming.

**Important Note:**
If you connect the lamp to your personal Hue account or Hue Bridge, you **must remove it before returning** the device to avoid additional service charges.

# How to Factory Reset
Before returning your rental device, the lamp must be fully reset.
### Reset — Using Bluetooth (Without Hue Bridge)
1. Turn the lamp **off** using the power cable.
2. Turn the lamp **on**.
3. In the Philips Hue app:
    * Go to **Settings → Lights**
    * Select the Gradient Signe Lamp
    * Choose **Delete / Remove Light**
4. Confirm removal.
The lamp will revert to its default state.

### Reset — If Connected to a Hue Bridge
1. Open the Philips Hue app.
2. Navigate to **Settings → Lights**.
3. Select the lamp and choose **Delete Light**.
4. Confirm removal from the Bridge.


# How to Return

### 1. Remove Personal Data
* Remove the lamp from the Philips Hue app
* Ensure it is no longer linked to any Hue Bridge or account
* Verify the lamp powers on in its default light mode

### 2. Clean and Repack
Wipe the lamp gently with a **soft, dry cloth only**.
Do **not** use liquids, sprays, or cleaning agents.
Repack the lamp, power adapter, and documentation in the **original packaging**.

## Important Notes
* **Reset Required:** Devices returned while still linked to a Hue account or Bridge may incur a refurbishing or reset fee.
* **Complete Packaging:** Missing accessories (especially the power adapter) may result in additional charges.
* **Report Issues:** Any damages, connectivity issues, or defects must be reported immediately. Unauthorized repairs or modifications are not permitted.