> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.monis.rent/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Big whiteboard setup guide


### **What’s in the box:**
* 1× Whiteboard panel
* 2× Vertical metal stands
* 2× Metal feet (base supports)
* 1× Horizontal crossbar
* 4× Caster wheels (optional, if included)

![](https://storage.crisp.chat/users/helpdesk/website/-/8/0/7/e/807e2a8d46912800/setup-big-whiteboard_13zuley.png =318xauto)


### **🔧 Step-by-step Instructions**

#### **Step 1 – Attach the feet**
* Take the two **metal feet** and connect them to the **bottom of each vertical stand** using bolts and the included wrench.
* Make sure the wheels (if any) are pointing outward.
* Tighten the bolts securely.
#### **Step 2 – Install the crossbar**
* Position the **horizontal crossbar** between the two vertical stands (around halfway up).
* Use screws or bolts to fix both ends of the crossbar to the stands.
* This will help stabilize the structure.
#### **Step 3 – Mount the whiteboard**
* Carefully lift the **whiteboard panel** and place it between the two vertical stands.
* Align the brackets or hooks on each side with the stands.
* Secure the board using the included fasteners or knobs (usually twist-locks).
#### **Step 4 – Final adjustments**
* Ensure all screws and bolts are tight.
* Test the rotation or lock feature if your board has one.
* Double-check wheel locks (if applicable) for safety.

### **✅ Done!**
Your big whiteboard is now assembled and ready for use.

### **📌 Extra Notes**
* Clean the board with a dry eraser before first use.
* Do not use permanent markers on the surface.
* For best results, place on a flat surface.